Rain Bird 1800 Spray Heads
1800 Series Spray Heads have first-rate quality built in for
reliable operation and long life. Their superior components
and features make them the spray heads of choice for a wide
variety of applications.
Features and Benefits:
Exclusive co-molded, pressure-activated,
multi-functional wiper seal assures positive seal without excess
“flow-by” which enables more heads to be installed
on the same valve.
Precision controlled flush at pop-down clears debris from unit,
assuring positive stem retraction in all soil types.
Strong stainless steel spring provides reliable stem retraction.
Two piece ratchet mechanism on all models allows easy nozzle
pattern alignment without tools.
Pre-installed 1800 Pop-Top™ flush plug blocks debris from
entering after flushing. Allows for easy nozzle installation.
Constructed of time-proven UV-resistant plastic and corrosion
resistant stainless steel parts, assuring long product life.
All sprinkler components are removable from the top without
special tools, providing for quick and easy flushing and maintenance
of the sprinkler.
Side and bottom inlets featured on 1806 and 1812 models.
Five-year professional customer satisfaction policy.
Nozzles for any of the above spray bodies--------------------------------------- Click
here for Nozzle selection
Rain Bird 1800-SAM Spray Heads
Ideal for use in areas with changing elevations
Features and Benefits:
The 1800 SAM Series offers
all 1800 Series features, plus:
Built-in Seal-A-Matic™ (SAM) check valve. Eliminates the
need for under-the-head check valves. No parts to be installed
at the site.
Traps water in lateral pipes in elevation changes of up to 14
feet (4,2 m). Reduces wear on system components by minimizing
water hammer during start-up.
Prevents drainage from spray heads at lower elevations. Stops
water waste. Ends landscape damage due to flooding and/or erosion.
Even stronger retract spring to accommodate elevation changes
up to 14 feet (4,2 m). One of the strongest springs in the industry.
Designed for use with all Rain Bird plastic and brass spray
head nozzles.
“SAM” stamped on cap for easy identification and
maintenance.
Five-year professional customer satisfaction policy.
Nozzles for any of the above
spray bodies--------------------------------------- Click
here for Nozzle selection
Rain Bird 1800-PRS Spray Heads
Designed for areas with high and/or widely fluctuating water
pressures.
Features and Benefits:
The 1800 PRS Series has all
1800 Series features, plus:
Patented PRS pressure regulator built into the stem. No parts
to be installed at the site. Saves time and money.
Maintains constant outlet pressure at 30 psi (2,1 Bars). Spray
heads and nozzles perform best at 30 psi. Ensures maximum spray
head and nozzle performance, even with varying inlet pressures.
Maintains constant pressure regardless of nozzle used.
Restricts water loss by up to 70% if nozzle is removed or damaged.
Saves water and money.
Reduces possibility of accidents and property damage. Recommended
for vandal prone areas.
Ends misting and fogging caused by high pressure. Stops water
waste. Ensures necessary watering occurs in high pressure or
wind conditions.
Designed for use with all Rain Bird plastic and brass spray
head nozzles.
"PRS" stamped on cap for easy identification and maintenance.
Five-year professional customer satisfaction policy.
Nozzles for any of the above
spray bodies--------------------------------------- Click
here for Nozzle selection
Rain Bird 1800-SAM PRS
Meets the needs of all spray areas,
regardless of changing elevation or water pressure.
Features and Benefits:
Incorporates all 1800 Series
SAM and PRS features.
“SAM-PRS” stamped on cap for easy identification
and maintenance.
Nozzles for any of the above
spray bodies--------------------------------------- Click
here for Nozzle selection
Rain Bird UNI-Spray
The UNI-Spray™ accepts all Rain Bird nozzles, including
MPR, VAN and U-Series, making it an excellent choice for watering
standard and irregular-shaped turf and shrub areas. For added
convenience, these reliable, compact spray heads can be shipped
with or without pre-installed Variable Arc Nozzles (VANs) that
are adjustable from 0° to full circle operation, saving
hours of installation time, effort and money.
Features and Benefits:
Pressure-activated, wiper seal
prevents excessive flow-by and water waste. Keeps debris from
entering upon retraction.
Durable stem ratchet allows for quick and easy nozzle pattern
alignment.
Internal parts removable from the top of the sprinkler for easy
servicing.
Small exposed cover makes the unit virtually invisible for more
attractive landscapes.
Rugged cover and body provide durability in high pressure and
surge conditions.
Plastic and stainless steel materials resist corrosion.
Economical, 6-inch (15,2 cm) pop-up model provides for unobstructed
watering of today’s taller turf grass varieties.
VAN nozzle and screen are easily removable for flushing.
UNI-Spray™ accepts all Rain Bird® Series nozzles and
accessories, which simplifies inventory management.
Optional field installable Seal-A-Matic™ check valve prevents
low head drainage up to five feet of elevation difference.
Three-year professional customer satisfaction policy.
10 VAN Series: 8 to 10 feet
12 VAN Series: 10 to 12 feet
15 VAN Series: 12 to 15 feet
18 VAN Series: 14 to 18 feet
|
