Please provide the following
information if you have city water:
your water source is through a pump, please click here for
a pump specific form:
Design Service only
Design Service and Materials
Turf & Plants
NOTE: (Call DO-IT-YOURSELF IRRIGATION at
877-529-6426 if your pressure is 39 PSI or less.)
To obtain your static water pressure, purchase a
pressure gauge at your local building supply and take a pressure
reading at your water faucet closest to your meter. Make
sure the water is not being used anywhere in the house. Turn
on the faucet with the gauge attached. The number indicated is your
static water pressure in pounds per square inches (PSI). Note: Plumbers often
will plumb one outside water faucet prior to the pressure regulator.
You'll find the meter size stamped on the meter. Note: If
you are unable to locate a pressure gauge and/or meter size, call
your water authority and they will be glad to give you that information.
Backflow prevention requirement:
(Call your building standard office for backflow information)
Backflow is not required
Double Check Valve is required.
PVB- Pressure Vacuum Breaker is required.
AVB-Atmospheric Vacuum Breaker is required.
RPZ- Reduced Pressure Zone is required.
I would like to use PVC Pipe.
I would like to use Polyethylene Pipe.
Pipe Installation Method:
Trenching (open trench during installation; this is the preferred
Vibra-plow (pulls poly pipe underground)
Valve Installation Method:
Field locations (Preferred.)
Manifold in one central location.
Manifold in multiple locations (Please mark locations on your plot.)
Survey or Plot:
I do not yet have a survey prepared
I will fax to: (704)
I will send in an E-Mail attachment to: Click
here to email
I will send by mail.
I prefer Nelson products.
I prefer Hunter products.
I prefer Rain Bird products.s
I prefer Toro products.
I prefer Weathermatic products.
I would like DIY Irrigation to choose my products.