More Info

PEB & PESB Series

Plastic Industrial Irrigation Valves

100-JTVF Irrigation Valve with flow control

The PEB Series is our most durable plastic irrigation valve. This industrial-strength glass-filled nylon globe valve is ideal for commercial irrigation applications.

The PESB series incorporates patented scrubber technology for reliable performance in dirty water irrigation applications.

Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance.
Globe configuration.
Normally closed, forward flow design.
Slow closing to prevent water hammer and subsequent system damage.
Low flow capability for a wide range of applications.
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
Flow control handle adjusts water flows as needed.
Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs.
Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads.
Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only).

100-PEB 1" (26/34) Valve	150-PEB 1 1/2" (40/49) Valve
200-PEB 2" (50/60) Valve	100-PESB 1" (26/34) Valve

150-PESB 1 1/2" (40/49)	200-PESB 2" (50/60) Valve

Rain Bird recommends flow rates in the supply line not to exceed 7.5 feet/second (2,3 m/s) in order to reduce the effects of water hammer
For flows below 5 GPM (1,14 m3/h; 0,32 l/s), Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm.
For flows below 10 GPM (2,27 m3/h; 0,63 l/s) Rain Bird recommends the flow control stem be turned down two full turns from the fully open position

Pressure: 20 to 200 psi (1,4 to 13,8 bar)
Flow without PRS-D option: 0.25 to 200 GPM
(0,06 to 45 m3/h; 0,02 to 12,60 l/s)
Flow with PRS-D option: 5 to 200 GPM
(1,14 to 45 m3/h; 0,32 to 12,60 l/s)
Temperature: Up to 150° F (66° C)
24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
- 0.41 A (9.8 VA) inrush curren
- 0.28 A (6.7 VA) holding current
Solenoid coil resistance: 24 Ohms, nominal

Options

Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
Accepts latching solenoid for use with Rain Bird battery-operated controllers.
Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1"); PEB-NP-HAN2 (1 1/2" and 2").

Dimensions

100-PEB:
6 1/2" x 4" x 4"
(16,5 cm) x (10,2 cm) x (10,2 cm)
150-PEB:
8" x 6" x 6"
(20,3 cm) x (15,2 cm) x (15,2 cm)
200-PEB:
8" x 6" x 6"
(20,3 cm) x (15,2 cm) x (15,2 cm)

Note: The PRS-D option adds 2" (5,1 cm) to the valve height.