RB_PGAfamily.jpg

Rain Bird PGA Series Irrigation Valves

Plastic Irrigation Valves

Rain Bird manufactures only the highest quality valves. PGA series plastic globe/angle valves may be used for residential and light commercial irrigation applications. The PGA Series offers versatility at an affordable price.

All Rain Bird valves work with any standard sprinkler timer.

Quantity:

More Info

PGA Series

Plastic Irrigation Valves


Rain Bird manufactures only the highest quality valves. PGA series plastic globe/angle valves may be used for residential and light commercial irrigation applications. The PGA Series offers versatility at an affordable price.

All Rain Bird valves work with any standard sprinkler timer.

  • Globe and angle configuration for flexibility in design and installation.
  • Rugged PVC and glass-filled nylon construction for reliable operation.
  • Normally closed, forward flow design.
  • Filtered pilot flow to resist debris and clogging of solenoid ports.
  • Slow closing to prevent water hammer and subsequent system damage.
  • Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator to be adjusted without turning the valve on at the controller.
  • One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
  • Non-rising flow control handle adjusts water flow as needed.
  • Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers.
  • Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1" and 1 1/2"); PGA-NP-HAN2 (2").


100-PGA
1" (26/34) Valve


150-PGA
1 1/2" (40/49) Valve

   

200-PGA
2" (50/60) Valve

  • Pressure: 15 to 150 psi (1,0 to 10,4 bar)
  • Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s)
  • Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s)
  • Temperature: Up to 110° F (43° C)
  • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
    • 0.41 A (9.8 VA) inrush curren
    • 0.28 A (6.7 VA) holding current
  • Solenoid coil resistance: 24 Ohms, nominal

Dimensions

  • 100-PGA:
    7 1/4" x 5 1/2" x 3 1/4"
    (18,4 cm) x (14,0 cm) x (8,3 cm)
  • 150-PGA:
    8" x 6 3/4" x 3 1/2"
    (20,3 cm) x (17,2 cm) x (8,9 cm)
  • 200-PGA:
    10" x 7 3/4" x 5"
    (25,4 cm) x (23,5 cm) x (12,7 cm)

    Note: The PRS-D option adds 2" (5,1 cm) to the valve height

Instruction Manual (PDF: 274 KB)
Valve Installation/Maintenance Tips (PDF: 229 KB)
Performance Charts (PDF: 61 KB)
Tech Specs (PDF: 979 KB)
Replacement Parts List (PDF: 217 KB)
PGA Valve Troubleshooting Guide (PDF: 610 KB)

 

Categories

Back Home

More Info

Your Shopping Cart

Rain Bird PGA Series Irrigation Valves

DIY Irrigation - This store is powered by ShopSite web catalog software.