Easily installs on any automatic irrigation system
Versatile enough to work with all popular controllers
Mechanism cannot be fouled by dirt or debris
Reliable operation, no false shutdowns
Adjusts to actuate at various rainfall quantities
Set from 1/8" to 1" based upon your local conditions
Includes 25 feet of 20 gauge two conductor wire
Fast and easy mounting out of sight
Your guarantee of dependable operation
MINI-CLIK – standard Mini-Clik model
MINI-CLIK-HV – code approved for liquid tight electrical fittings
for 120 or 240 volt wiring applications
MINI-CLIK-C – 1/2" female threaded inlet at bottom
MINI-CLIK-NO – normally open switch
MINI-CLIK-C-NO – 1/2" female threaded inlet at bottom, normally open switch
• Height: 5"
• Length: MINI-CLIK: 6"
MINI-CLIK-HV: 7 1/2"
• Switch Rating: 5 amps, at 125/250VAC
MINI-CLIK and MINI-CLIK-C: Typically interrupts the common ground wire between the solenoid valves and the controller
MINI-CLIK-HV: For use with high voltage irrigation systems, and systems using pumps drawing less than 10 amps peak
MINI-CLIK-NO: for use with controllers that require a normally open sensor switch
• Included: 25 ft. of #20 two conductor wire, (direct burial and UV approved) two mounting screws, controller identification label and detailed instructions
• UL listed
• Optional metal gutter mount for Mini-Clik (order SGM)
|EXAMPLE: MINI-CLIK - HV
HV = High Voltage Model for 110/220VAC Applications
C = Conduit Mount
NO = Normally Open Switch
|Note: For Mini-Clik in Sensor Guard enclosure, specify SG-MC.
To add Bypass Switch Box to any non-Hunter controller
installation, specify BPSW with sensor. Bypass switch function
is standard in Hunter SRC, Pro-C, and ICC controllers.
|SGM = Optional Gutter Mount
Your Shopping Cart
Hunter Mini-Click Rain Sensor
DIY Irrigation - This store is powered by ShopSite web catalog software.