6 Fountain Patterns for the Price of One!
Marine's 8400JF, 2 hp Floating Aerating Fountain
or Decorative Fountain Aerator is great for larger
ponds or when multiple large patterns are desired.
The Kasco 8400JF Floating Aerating Fountain is
unique for its size, in that, it comes standard
with 5 interchangeable nozzles and can be operated
without a nozzle to give you 6 FOUNTAIN PATTERNS
FOR THE PRICE OF ONE! The 6 fountain patterns range
from 22' in height to over 40' in diameter. With
6 multiple fountain patterns, you have the freedom
to adjust the aerating fountain to fit your pond,
weather conditions, and your tastes. Kasco's 8400JF
Floating Aerating Fountain does a great job at
adding oxygen and improving your pond or lake aeration.
The 8400JF Floating Aerating Fountain is available
in a 240V, 60Hz model. Click
here to download a
NEW Kasco "J" Series Floating Aerating
Adding a LR-375
Low Voltage Light Kit to the 8400JF
Fountain adds a touch of class to this beautiful
display during the
nighttime hours. The LR-375 Low Voltage Light
Kit includes three machined, bronze, light fixtures
with 75 Watt MR-16 Halogen bulbs in each fixture.
The LR-375 Low Voltage Light Kit's transformer
is built into light kit itself, so all you have
to do is plug the lights into the C-85 Control
panel. Three clear MR-16 bulbs are included with
each LR-375 Low Voltage Light Kit, however, you
can chose any or all of the optional colors of
Red, Green, Blue, & Yellow..
The 8400JF, 240V Floating Aerating Fountain also
includes a GFCB protected control panel. The C-85,
240V Control Panel with Timer, GFCB protection,
120V GFI Protected Outlet for Lights, and Photo
Eye for light operation comes standard with the
8400JF Floating Aerating Fountain. Kasco recommends
a licensed electrician to install the C-85 Control
Panel and the 8400JF if you plan to hard-wire the
Floating Aerating Fountain into the C-85 Control
Kasco's 8400JF Floating Aerating Fountain also
has a NEW float design.This new float has a
lower profile while sitting in the water and
also has a new, non-circular shape. Each 8400JF
Floating Aerating Fountain is now shipped with
this new float. All the hardware is the same
as used with the previous model float.
The 8400JF Floating Aerating Fountain model includes
the following staples of all Kasco Floating Fountains,
Pond Aerators, or Water Circulators:
top and bottom ball bearings
- Environmentally friendly oil-filled motor with
a hard-face internal mechanical seal
and external lip seal for protection against
- Flood oil lubricated for excellent heat
Highly efficient, lower power consumption
than competitive equipment
- Superior dependability in salt-water
or other corrosive environments.
All external metal
and hardware components are of stainless
steel composition and protected by
a sacrificial zinc
- Requires minimal maintenance. We recommend cleaning
the stainless steel motor housing once or twice
per year and replacing the sacrificial zinc anode
when visibly corroded.
- ETL listed
to stringent UL and CSA Safety Standards
with pride in the U.S.A. Along with the staples
of all Kasco
Fountains, Pond Aerators, and Water Circulators,
Floating Aerating Fountain boasts the following
- Kasco's unique water-deflecting nozzle design
gives you the most clog-resistant model on the
- Two year manufacturer's limited warranty
- Impeller technology giving the unit breathtaking
patterns and high water flow for full fountain
- Successful shallow water operation in as little
as 20 "
- 10 running amps on a 240V circuit for low operating
- SJTOW underwater rated power cord length options
of 50', 100', 150', 200', or 250'
- Includes three 50' braided nylon mooring ropes
- 8400JF ships in 3 or 4 boxes via UPS (add 1
box for lights)
- 5 interchangeable nozzles to give you 6 fountain
patterns (6th pattern running without nozzle)
for the price of one!
- New Nozzle Design for Increased Pattern
Diameter and Ease of Use!