Kasco Marine's NEW
8400VFX, 2 hp Floating, Aerating Fountain or
Decorative Fountain Aerator is great
for larger ponds. The classic Kasco "V" fountain
pattern, 8' tall x 32' wide gives this model a beautiful
fountain pattern. The larger motor and enhanced propeller
design gives the 8400VFX 2.5 times the water flow
as the 4400VFX. Kasco's 8400VFX Floating Aerating
Fountain does an excellent job at adding oxygen and
improving your pond or lake aeration.
aerating fountain pattern will assist in improving
your water quality as well as adding to the aesthetic
appeal of your pond. The 8400VFX Floating, Aerating
Fountains are available in 240V, 60Hz models.
Adding a LR-375 Low Voltage Light Kit to the 8400VFX
Floating Aerating Fountain adds a touch of class
to this beautiful fountain display during the nighttime
hours. The LR-375 Low Voltage Light Kit includes
three machined, bronze, light fixtures with 75 Watt
MR-16 Halogen bulbs in each fixture. The LR-375 Low
Voltage Light Kit's transformer is built into light
kit itself, so all you have to do is plug the lights
into the C-85 Control panel. Three clear MR-16 bulbs
are included with each LR-375 Low Voltage Light Kit,
however, you can chose any or all of the optional
colors of Red, Green, Blue, & Yellow.
The 8400VFX Floating, Aerating Fountain also
includes a GFCB protected control panel. The
C-85, 240V Control
Panel with Timer, GFCB protection, 120V GFI Protected
Outlet for Lights, and Photo Eye for light operation
comes standard with the 8400VFX Floating Aerating
Fountain. Kasco recommends a licensed electrician
to install the C-85 Control Panel and the 8400VFX
if you plan to hard-wire the Floating, Aerating
Fountain into the C-85 Control Panel.
The 8400VFX Floating, Aerating Fountain models include
the following staples of all Kasco Floating Fountains,
Pond Aerators, or Water Circulators:
• Longer-life top and bottom ball bearings
• Environmentally friendly oil-filled motor with a
hard-face internal mechanical seal and external
lip seal for protection against leaks.
• Flood oil lubricated for excellent heat dissipation.
• Highly efficient, lower power consumption than competitive
• Superior dependability in salt-water or other corrosive
environments. All external metal motor, float,
and hardware components are of stainless steel composition
and protected by a sacrificial zinc anode.
• Requires minimal maintenance. We recommend cleaning
the stainless steel motor housing once or twice
per year and replacing the sacrificial zinc anode when
• ETL listed to stringent UL and CSA Safety Standards
• U.P.S. Shippable
• Made with pride in the U.S.A.
Along with the staples of all Kasco Floating Fountains,
Pond Aerators, and Water Circulators, the 8400VFX
Floating, Aerating Fountains boast the following
• Lightweight and easy to install (minimal assembly
• REDESIGNED FLOAT WITH LOW PROFILE AND ATTRACTIVE
• Large, clog-resistant decorative fountain pattern,
8' tall x 32' wide
• Two year manufacturer's limited warranty
• Successful shallow water operation in as little as
• 10 running amps on 240V circuits for low operating
• SJTOW underwater rated power cord length options
of 50', 100', 150', 200, or 250'
• Includes three 50' braided nylon mooring ropes
• 8400VFX ships in 3 or 4 boxes (depending on cord
length) via UPS (add 1 box for lights)